PL Maschine

What to look for when buying an incubator

A comprehensive guide to successful hatching: what a good machine must be able to do, and what you should stay away from.

There are many kinds of incubators on the market, with substantial price differences, and many of us wonder which one actually delivers good hatching results. After gathering a few opinions it turns out that quite a number of them perform rather poorly.

It is fair to ask: can you tell in advance what results to expect from a device that calls itself an incubator?

Let us first review the conditions of successful hatching — after that it will be easier to answer what makes a good incubator.

Successful artificial incubation needs three things:

I. Good equipment, that is, a good incubator.

II. Good breeding material.

III. A careful keeper.

If any one of them is lacking, the hatching result deteriorates!

The best way to start is with preparation — by acquiring knowledge.

What happens during incubation — the tasks to be carried out while hatching:

1. Temperature
2. Humidity
3. Egg turning
4. Periodic cooling
5. Hatching phase
6. Cleaning, disinfection

1. Temperature

The single most important factor determining the quality of incubation is the temperature of the eggs.

The desired temperature must be kept within ±0.2 °C inside the hatching chamber!

It follows that both the accuracy of temperature control and the heat distribution inside the machine matter.

a) Temperature control

It depends on how advanced the electronics are: how accurately it measures, how accurately it regulates, whether it can hold the desired temperature over the long term to a tenth of a degree. At today's level of electronics it is reasonable to expect an automatic control program that maintains the desired temperature by varying the heating power, even as internal and external conditions change.

Controllers display the temperature they measure, but that does not guarantee it really is that value, nor that it is the same throughout the chamber. You need a calibrated, independent thermometer accurate to a tenth of a degree — preferably with a long probe that reaches down to the eggs.

Do not buy a machine on which the required temperature cannot be set! It must be adjustable and calibratable!

b) Heat distribution

Heat distribution inside the machine matters too — every egg has the same temperature requirement. There are two ways to ensure even heat distribution: good thermal insulation and/or ventilation.

The cheapest solution is a thin-walled plastic box — with the following consequences:

  • • Wasted energy: more heating power is needed, more electricity is consumed
  • • More fan power is needed → again more electricity
  • • Larger temperature differences → worse hatching results

Comparative figures:

Well-insulated 100-egg incubator (2 cm wall): max. 60 W, once heated up 15–20 W → 0.2 W per egg

Acrylic 50-egg machine: 160 W, once heated up approx. 80 W → 1.6 W per egg

Eight times the specific energy consumption — and it shows in the hatching results too!

DO NOT BUY AN ACRYLIC MACHINE if you want a good one! Why are industrial incubators built from insulated sandwich panels 5 cm thick? Energy efficiency is not the only reason — accuracy to a tenth of a degree is the requirement!

2. Humidity

During incubation the egg must lose 13–15% of its mass. Carbon dioxide and water vapour released through the shell account for most of this loss — as a result the air cell grows. During the hatching phase the embryo cuts through the shell membrane and switches to lung breathing. If the air cell is small, it suffocates.

In simpler machines humidity is maintained by filling the water channels to a given proportion, based on empirical data. It is even better to use a hygrometer and top up the evaporated water according to the measured value (e.g. MIDI 55, 60, 100, F230, F500 incubators). The most refined solution is when the machine measures and regulates humidity itself — such are the “S” variants of the MIDI series and the industrial incubators.

3. Egg turning

The embryo must be in contact with the yolk material over as large a surface as possible. Without turning, the embryo sticks to the shell and suffocates. In natural incubation the hen turns the eggs — that is what has to be imitated.

180° turning (manual)

For eggs lying in a nest position: once in the morning and once in the evening is enough. Twice a day.

±45° turning (automatic)

The egg does not fall out of the tray, but for that reason it must be turned every 2 hours — at night as well! All large industrial incubators turn every 2 hours.

A hand-operated lever turning mechanism is A SCAM — it would have to be moved every 2 hours, which nobody does at night. Distributors keep quiet about this. It is not a solution, it is deceiving the customer!

4. Cooling

Not even a mother hen can sit for 21 days without a break — while she eats and drinks, the eggs cool down. This periodic cooling is built into the incubation programme, and it must be imitated in artificial incubation as well!

In machines with individual manual turning, cooling happens automatically, because the top has to be removed for turning. In machines with automatic turning, from the fourth day onwards the machine must be switched off and opened once a day for 10–15–20 minutes.

5. Hatching phase and cleaning

At the end of incubation comes the hatching phase — with droppings, blood, grime, dirt and down. An ideal breeding ground for all kinds of infection. The construction of the machine must therefore be easy to clean and disinfect, with no closed-off, inaccessible parts.

Wooden housing

It soaks up the grime. Nooks and crannies that are sealed off. Impossible or very hard to clean.

Chipboard housing

Incubation is a wet technology — chipboard does not tolerate it. It disintegrates.

An incubator with a wooden or chipboard housing is no good! Sealed-off, uncleanable interior parts have no place in an incubator!

Why the manufacturer and distributor matter

How competent is the manufacturer, how long have they been in the field? Do the machines have CE certification? How thorough and well prepared is the user manual?

If there is no manufacturer behind the seller, there are no spare parts and no service — that is very risky. Whatever can break, will break. That is when the reliability, fairness and availability of the distributor becomes important.

Pay attention to customer reviews as well!

II

The breeding material — the quality of the eggs

Fertility is decisively determined by the hereditary factors of the breed and by the age of the laying flock and the cock. If you incubate your own eggs, one cock is needed for 10–15 hens. Refresh the flock regularly and rotate the cocks (inbreeding!).

Age of the egg: no older than 10 days

Storage temperature: between 10–20 °C

Storage method: on egg trays, pointed end UPWARDS

Recommended humidity: 60–70%

Shape index: length/width = between 1.25–1.4

Weight: 50–65 grams is best for the hatching rate

Candling: on days 6–7 and 15–16; suffocated eggs must be removed

The egg must be clean! Never use soiled, damaged or cracked eggs for incubation!

III

The careful keeper

Successful incubation is by no means self-evidently simple, requiring no preparation at all! The knowledge involved is wide-ranging and available in the professional literature.

Dr. Ferenc Bogenfürst: Keltetés (Incubation) is also available from us. The larger and more valuable the flock you keep, the more knowledge matters.

Summary — WHAT NOT TO BUY:

One where the temperature cannot be measured and set at the eggs, or which does not hold the temperature accurately!

The housing is not insulated — an acrylic machine!

The housing is a wooden or chipboard box!

It has sealed, uncleanable interior spaces!

Egg turning is by hand-operated lever!

The manufacturer or distributor is unknown, uncertain or has a bad reputation — the machines are not certified!

These are the aspects most often neglected at the time of purchase, yet they are anything but secondary.

László Pécsi

Important information